- Stock: In Stock
- Product code: Product cr6241
20 km of stable signal where others lose connection.
This repeater stands out due to the combination of several critical advantages at once:
- two bands (2.4G and 5.8G), which allows you to choose the cleanest channel,
- two modules for signal amplification and effective obstacle avoidance,
- and most importantly - a really long range of up to 20 km.
This means not just “further”, but more stable control without interruptions, even in difficult conditions (city, obstacles, radio noise). As a result, you get control and confidence where conventional systems can no longer cope.
Description
TR01 is a professional dual-band receiver/repeater designed for UAV operations and advanced ground control setups where link stability matters more than anything. With support for 2.4 GHz and 5.8 GHz, you can select the cleaner band for the environment and reduce interference, while the dual amplifier architecture helps maintain a solid connection through obstacles and RF-noisy areas.
TR01 can be deployed as a standalone receiver or as a repeater to extend coverage and improve line-of-sight routing. This flexibility is ideal for missions where the best receiving point is not at the pilot’s location, or when you need to place a relay to overcome terrain, buildings or other signal blockers. In practical scenarios, TR01 supports stable control and data transmission across 10–20 km (depending on antennas, altitude and RF conditions), reducing dropouts and keeping the operator confident throughout the flight.
Integration is straightforward thanks to two Ethernet channels, plus SBUS and PWM outputs. Adjustable channel bandwidth (from 1.25 up to 40 MHz) lets you tune the system for either maximum robustness or higher throughput. Wide input power support 7.2–72 V via XT30 makes it compatible with a broad range of platforms. Configuration and fast mode switching are handled through the intuitive SKYDROID FLY GCS interface.
Specifications:
• Frequencies: 2.4 GHz / 5.8 GHz
• Modes: Receiver / Repeater
• Power input: 7.2–72 V (XT30)
• RF output power: 23 dBm @CE/FCC
• Interfaces: 2×Ethernet, 1×SBUS, 3×PWM
• Data rate: uplink up to 1.2 Mbps, downlink up to 20 Mbps
• Channel bandwidth: 1.25/2.5/5/10/20/40 MHz
• Size: 248×140×20 mm
• Weight: 191 g
• Operating temperature: -10℃ to 60℃
In the box:
• TR01 receiver/repeater — 1 pc
• 2.4G/5.8G antennas — 2 pcs
• XT30 power cable — 1 pc
• Documentation — 1 set
