Vector network spectrum analyzer Nanovna GS320 6GHz
Menu
Your Cart

Vector network spectrum analyzer Nanovna GS320 6GHz

Vector network spectrum analyzer Nanovna GS320 6GHz
Vector network spectrum analyzer Nanovna GS320 6GHz
Vector network spectrum analyzer Nanovna GS320 6GHz
Vector network spectrum analyzer Nanovna GS320 6GHz
Vector network spectrum analyzer Nanovna GS320 6GHz
Vector network spectrum analyzer Nanovna GS320 6GHz
Vector network spectrum analyzer Nanovna GS320 6GHz
Vector network spectrum analyzer Nanovna GS320 6GHz
Vector network spectrum analyzer Nanovna GS320 6GHz
Vector network spectrum analyzer Nanovna GS320 6GHz
Vector network spectrum analyzer Nanovna GS320 6GHz
Vector network spectrum analyzer Nanovna GS320 6GHz
Vector network spectrum analyzer Nanovna GS320 6GHz
  • Stock: In Stock
  • Product code: Product cr6026
9,145.00 грн
  • Operating frequency range: 23MHz-6200MHz
  • Battery capacity: 4000 mAh
  • Screen diagonal: 3.2"
  • Metal body

Description

Portable 1-port vector network analyzer GS320 for measuring the coherent characteristics of passive and active radio equipment (antennas, cables, filters, attenuators, amplifiers, etc.). . The device allows you to measure such parameters as complex reflection coefficients, standing wave ratio (VS WR), impedance, conductivity, amplitude, phase, loss and damage distance in cables.

The device is intended for radio amateur use, as it is not a professional measuring instrument. The presence of a built-in battery allows you to carry out measurements in laboratory and outdoor conditions.

The near-field probe is mainly used to find the source of interference and determine the cause of the interference.

Model: 9kHz-3GHz Near Field Probe (keep hands away from PCB when using) Operating frequency: 9KHz-3GHz; Connector: SMA connector. Model: 9KHz-3GHz Near Field Sensor (Keep hands away from PCB when using) Operating frequency: 9KHz-3GHz; Connector: SMA socket

  • Device menu language: English
  • Operating frequency range: 23MHz-6200MHz
  • Frequency resolution, for frequencies 100-6200 MHz: 10 kHz
  • Maximum number of scan points: 1000
  • Scanning speed: 1000 points/s
  • Directionality, uncorrected over full range: > 12 dB
  • Effective directivity (after full calibration of one port): > 50 dB
  • Standing wave coefficient at the entrance: < 2
  • Accuracy of phase measurement:> 1.5°
  • Magnitude measurement accuracy: > 0.25 dB
  • Resolution determining the distance to the fault: (CxVF)/2S m
  • The maximum length of the measured cable 4 at VF=1:3000 m
  • Maximum DC input voltage: 25V

Areas shown:

■ Smith diagram; ■ polar map; ■ reflection coefficient phase;

■ value; ■ logarithmic value; ■CSR; ■ distance to the fault; ■ cable loss

Number of user settings to save: 8

Operating temperature range: 0-40 ℃

Screen diagonal: 3.2"

Screen type: touch, resistive

Battery capacity: 4000 mAh

Overall dimensions (LxWxH): 145x7

There are no reviews for this product.

Write a review

Please login or register to review
The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.
Name
Email
Phone