SA6 6GHz spectrum analyzer

Your multi-frequency spectrum analyzer in a metal case.

• Display frequency range: 35-6200 MHz.
• Display: color touch screen with a diagonal of 3.2 inches
• The battery provides up to 3 hours of continuous operation when fully charged.
• Battery charging time: ~ 5 hours.

Description of the SA6 6GHz spectrum analyzer

Portable spectrum analyzer SA6-TG. - an inexpensive solution for mobile operators, military, REA developers, security, etc.

The SA6 is a simple portable spectrum analyzer and signal source designed to display the spectrum of signals in the frequency range from 35 to 6200 MHz.The analyzer searches for the amplitude and frequency of the spectral components of the analyzed process. This spectrum analyzer can handle signals from all commonly used technologies: Wi-Fi, 2G, 3G, 4G, LTE, CDMA, DCS, GSM, GPRS, GLONASS, etc. Another important feature is the additional functionality of the trace generator, which allows you to measure passive or active components such as filters or active devices. (for example, a filter or an amplifier). The software can measure SWR and return loss modules. This requires an external directional coupler and a set of calibration measures. SA6 is mainly used for field operations. The device is strong, light and consumes low energy. This enables service centers and maintenance teams to perform on-site high-frequency analysis of commissioning and repair work. In addition, the spectrum analyzer is an ideal solution for repair shops and radio amateurs. Device menu language: English.

Features:

1. Two-in-One: Maximize your diagnostic toolset with a state-of-the-art spectrum analyzer and signal generator combination. This portable device doubles as a robust spectrum analyzer and accurate signal generator, serving a variety of technical applications in one compact device.

2. Wide Frequency Range: Our handheld spectrum analyzer is your favorite tool for advanced RF spectrum analysis, covering a wide range from 35MHz to 6200MHz. It is ideally designed for evaluating base station signals using an external antenna, optimizing cellular networks, and fine-tuning communications equipment for maximum performance.

3. 3.2 Inch Touch Screen: The 3.2 inch touch color display of our portable spectrum analyzer vividly presents your real-time data. This screen, which comes with a stylus, ensures that every interaction with your measurements is as intuitive as it is accurate.

4. Built-in battery with a capacity of 3000 mAh. Our frequency analyzer is powered by an internal 3000 mAh battery, giving you at least 4 hours of continuous portable operation. Break free from the limitations of power supplies for field work and on-the-go analysis.

5. PC software control: Expand your analytical capabilities with the SA6 spectrum analyzer, which can be connected to a PC for complex data processing. The accompanying software turns your PC into a command center for sophisticated analysis and customized management.

Complete set

SA-6 spectrum analyzer (with built-in generator) – 1 pc.

Resistive touch pen - 1 pc.

30 cm SMA cable - 1 pc.

SMA-KK adapter - 1 pc.

Type-C USB cable 1 m - 1 pc. for data transfer and charging.

Characteristics

- Certification: CE

- Body material: ABS

- Product size: approximately 135.00x75.00x23.00 mm

- Product size: 5.31x2.95x0.91 inches

- Display frequency range: 35-6200 MHz.

- Measurement frequency range: 35-4500 MHz.

- Dynamic range 35-3000 MHz: 75 dB.

- Dynamic range 3000-4500 MHz: 70 dB.

- Maximum range: 6165 MHz.

- Bandwidth: 200 kHz, fixed.

- View frequency band scan speed above 100 MHz: 700 MHz/s.

- 100 MHz sweep: <0.25 seconds.

- Noise level up to 3000 MHz: <-90 dBm.

- Noise level 3000-4500 MHz: <-85 dBm.

- Minimum noise level 4500-6200 MHz: <-80 dBm.

- Wave resistance: 50 ohms.

- Standing wave coefficient in the working frequency range: <1.5.

- Internal attenuator: 0-30 dB.

- Error when fading up to 10 dB: 2 dB.

- 10 to 20 dB attenuation error: 5 dB.

- 20 to 30 dB attenuation error: 8 dB.

- Output power of the tracking generator: from -15 to -25 dBm.

- Accuracy in the dynamic range: 2.0 dB.

- Maximum input power of the attenuator at 0 dB: 10 dBm.

- Maximum input power with more than 20 dB attenuation: +20 dBm.

- Maximum input signal: +10 dBm.

- Maximum DC input voltage: 25 DC.

- Maximum current consumption when working from the battery: 450 mA.

- Maximum current consumption when working from USB: 500 mA (when charging).

- Battery: 2500 mAh.

- Duration: 3 hours.

- Battery charging time: ~ 5 hours.