- Stock: In stock
- Product code: Product cr6032
- USB Type-C for connection to computers and mobile devices;
- Ability to save up to 5 different settings;
- Support for microSD cards for memory expansion and convenient data storage;
- Supports time domain analysis (TDR) function;
- Interface displays battery level;
Description
A compact and powerful vector spectrum analyzer designed for professional measurement and analysis in the frequency range from 10 kHz to 1.5 GHz. Its characteristics and capabilities make it an ideal tool for radio amateurs, engineers and RF specialists.
The analyzer covers the range from 10 kHz to 1.5 GHz, providing versatility in measuring the characteristics of various RF components and systems.
Dynamic range up to 70 dB in the range of 50 kHz - 300 MHz, 60 dB in the range of 300 MHz - 900 MHz, and 40 dB in the range of 900 MHz - 1.5 GHz.
Supports measurement of amplitude-frequency response (AFR), standing wave ratio (SWR), phase, delay and Smith chart. Output of all S11 and S21 parameters.
Equipped with a 2.8-inch TFT display (320 x 240 pixels) with touch control, which provides ease and convenience in working with the device.
The new version of the device supports MicroSD cards up to 32 GB to save measurement data, which eliminates the need to connect to a phone or computer. Also added support for a Type-C data cable for connecting mobile phones, improving interaction with the device interface.
The built-in 650 mAh battery provides up to 6 hours of operation in standalone mode.
The device has compact dimensions (54 mm x 85.5 mm without protruding parts), which makes it easy to carry in a pocket or carrying bag.
Specifications:
- PCB: 54 mm x 85.5 mm x 11 mm (excluding connectors and switches)
- Measured frequency range: 10 kHz - 1.5 GHz
- RF output: -13 dBm (maximum -9 dBm)
- Frequency accuracy: < 0.5 ppm
- Measured range:
70 dB (50 kHz - 300 MHz)
50 dB (300 MHz - 600 MHz)
40 dB (600 MHz - 900 MHz) with extended firmware
- Port SCR: < 1.1
- Display: 2.8-inch TFT (320x240)
- USB interface: Type-C
- Communication mode: CDC (serial port)
- Power supply: USB 5V 120 mA, built-in 650 mAh battery, maximum charging current — 0.8 A
- Number of calibration points: 101 (fixed)
- Number of scan points: 101 (fixed)
- Trace display: 4, marking: 4, saving settings: 5
- Measured parameters: S-parameters, VSWR, phase, delay, Smith chart, etc.
Package contents:
1x NanoVNA (with 2.8-inch touch screen and 650 mAh battery)
2x SMA Male to Male RF cable (20 cm, RG174)
2x SMA Female to Female adapter
1x SMA SHORT calibration kit
1x SMA OPEN calibration kit
1x SMA LOAD calibration kit
1x USB Type-C cable
1x Type-C to Type-C cable
1x Touch pen
