- Stock: In Stock
- Product code: Product cr6026
A vector analyzer in a case you can trust!
- Operating frequency range: 23MHz-6200MHz
- Battery capacity: 4000 mAh
- Screen diagonal: 3.2"
- Metal body
Description:
The NanoVNA GS-320 6 GHz portable vector network analyzer is equipped with a 3.5-inch LCD screen and a 4000 mAh battery, which allows you to measure the characteristics of passive and active radio equipment, including antennas, cables, filters, attenuators and amplifiers. The device allows you to determine the parameters of the complex reflection coefficient, standing wave ratio (VSWR), resistance, phase, amplitude, loss and find damage in cables. The main advantages of the model are wide functionality, autonomous operation thanks to the built-in battery, high measurement accuracy and reliable design.
The device case is made of durable aluminum, which guarantees durability and accuracy of operation. On the front panel there is a 3.2-inch color display with a resolution of 320x240 pixels, and next to it there are 8 control buttons. The SMA connector for connecting an antenna or cable is located on the left side, and on the right side there is an ON/OFF switch and a USB connector. Inside the device is a 4000 mAh battery.
With a frequency range of 23 to 6200 MHz, including popular frequencies of Bluetooth, Wi-Fi, 2.4 GHz, 5.8 GHz, GPS, Beidou and IoT devices, it allows you to analyze the parameters of antennas, cables, amplifiers, filters and attenuators with high accuracy, and is also equipped with a built-in SWR meter to ensure reliable measurements.
The device is characterized by low power consumption: the battery lasts for about 4 hours of operation, and charging takes about 6 hours via a USB port. Despite the durable metal case, the device weighs only 480 grams and has compact dimensions, which makes it convenient for transportation and use in various conditions.
Characteristics:
Operating frequency range: 23 - 6200 MHz
Frequency resolution: 10 kHz
Maximum number of scan points: 1000
Scan speed: 1000 points/sec
Bridge directionality (without correction in the entire range): > 12 dB
Input spurious ratio: 2
Phase measurement error: no more than 1.5°
Magnitude measurement error: no more than 0.25 dB
Effective directivity (after full calibration of one port): > 50 dB
Determination of the resolution of the distance to the fault point: (C x VF) / 2S m
Maximum length of the measuring cable: at VF = 1: 3000 m
Maximum DC input voltage: 25 V
Diagrams shown: Wolpert-Smith diagram, polar diagram, reflection coefficient phase, KO magnitude, log KO magnitude, SWR, distance to fault, cable loss
Screen diagonal: 3.2 inches
Screen resolution: 320 x 240 dots
Screen type: resistive
Power supply: built-in 4000 mAh battery
Battery operating time: almost 4 hours
Battery charging time: up to 6 hours
Operating temperature range: from 0 to +40 °C
Dimensions: 145 x 72 x 24mm
Weight: 480 g
Package contents:
Portable vector network analyzer NanoVNA GS-320 6 GHz: 1 pc.
USB Type-C data cable: 1 pc.
SOL calibration plug set: 1 pc.
N female - SMA male adapter: 1 pc.
Stylus: 1 pc.
User manual (English): 1 pc.
