- Stock: In Stock
- Product code: Product cr6240
Accurate RF measurements and tuning — in a pocket-sized format
- Wide range 1–6300 MHz — suitable for most radio-frequency tasks.
- S11 and S21 measurements — monitor reflection and signal transmission through the path.
- 4" IPS touch display — fast control and clear readability in the field.
- Rugged metal корпус — better protection, shielding and portability.
- Smith chart, VSWR, amplitude/phase response, markers — clear analytics right on the screen.
Description
VNA6 is a compact two-port vector network analyser designed for rapid diagnostics, verification and precise tuning of RF paths in the 1–6300 MHz band. The instrument measures S11 (reflection coefficient) and S21 (transmission), allowing you to quickly assess the real condition of an antenna, cable or any RF component. In practice, this means clear answers to the key questions: where the resonance is, what the impedance is at the operating point, what the VSWR is, what the line losses are, and how the amplitude and phase response behave over the required part of the spectrum.
A 1001-point sweep provides a detailed view of the plots: it’s easier to track narrow resonances, dips or “shelves”, and to compare results more accurately before and after tuning. Popular analysis views are available: Amplitude/Frequency, Phase/Frequency, VSWR, Smith chart. Up to 4 markers are provided to instantly read values at specific frequencies and avoid time-consuming manual calculations.
The bright 4" IPS display with a resistive touchscreen is convenient for on-site work, while the metal enclosure increases durability and reduces interference. Power comes from a 3.7 V battery with charging via USB Type‑C, so the VNA6 is easy to take with you for installation, tuning or quick checks on site. For different scenarios, you can save up to 32 calibration sets, speeding up work and minimising repeated preparation. The interface supports Chinese / English / Russian.
Specifications
- Type: portable Vector Network Analyser (VNA)
- Frequency range: 1 MHz – 6300 MHz
- Measured parameters: S11, S21
- Number of sweep points: 1001
- Display: 4" IPS, touch (resistive), high brightness
- Enclosure: metal
- Display modes: amplitude/frequency, phase/frequency, VSWR, Smith chart
- Markers: up to 4
- Calibration memory: up to 32 sets
- Connectors: 2 ports (SMA)
- Power/charging: USB Type‑C, 3.7 V battery
- Applications: antennas (Wi‑Fi/BT/GPS/ISM/HF), coaxial cables and lines, filters, amplifiers, attenuators, power splitters, couplers, duplexers and other RF components.
Package contents
- VNA6 analyser — 1 pc,
- USB Type‑C cable — 1 pc,
- stylus — 1 pc,
- 2 coax patch leads (SMA) — 2 pcs,
- set of SMA adapters/accessories,
- box.
Note: for accurate measurements, perform calibration before use (OSL/OSLT depending on the task).
